Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rotor cable
#1
I need 50' of 8 wire rotor cable for my ham IV rotor so 2 of thoes wires needs to be 16ga at least let me know what you got thanks. you can reach me at 541-729-7972 or here on the my513.net or on the 145.130 reapeater on tuesday nights between 1900 and 2000 hrs.

Thanks
73
KC7NHT
Cyrel


PODXS 070 member #1331
EPC member #14448
PRA Board Member
Reply
#2
Cyrel,

I don't have any eight conductor wire, but I DO have an account at most of the local electrical supply shops (Platt, Greybar, ConnectAir, etc.) - so if you ever decide you want/need new wire I can get you a decent deal (Better than advertised, anyway).

KA7HBB will be bringing 75' of seven conductor 18 AWG wire to Field Day for my rotator (Which I may or may not have ready in time for Field Day). If you can get you hands on some two conductor stuff that is at least 16 AWG for the motor power, then we can use the seven conductor for the rest of it.

I hope this helps!
W0ULF 2011+
ex KF7RJU 2011-2011
ex KC7YNP 1997-2007
Rigs: Heathkit RX-1 Mohawk Receiver and HX-10 Marauder Transmitter, IC-7410 Base HF w/AH-4, IC-2720 Mobile Dual Band, IC-V8000 Go-Bag 2m, IC-2820 base 2m/70cm (That goes to Field Day or goes in the other truck when I'm driving it), Kenwood TH-75A and Icom IC-92AD HTs.
Reply
#3
That would work I think
73
KC7NHT
Cyrel


PODXS 070 member #1331
EPC member #14448
PRA Board Member
Reply


Bookmarks

Possibly Related Threads...
Thread Author Replies Views Last Post
  Coaxial Cable Wanted W7RMG 0 462 03-23-2017, 08:52 PM
Last Post: W7RMG

Forum Jump:


Users browsing this thread: 1 Guest(s)